The （） in the injector will lift at a pre-set pressure which ensures that the fuel will atomize once it enters the cylinder.
A
举一反三
- The needle valve in the injector （） at a pre-set pressure which ensures that the fuel will atomize once it enters the cylinder.
- The gas lift valve is the channel and switch where the gas enters the lift pipe.
- Each cylinder has one starting valve which is usually opened by air pressure and closed by （）
- With supercharging a larger mass of air is supplied to the cylinder by blowing it in under pressure， which is the best means to （） of the engine.
- The plunger in the fuel injector pump， usually operated by a （）， is driven up and down when working.
内容
- 0
（） rods are not in proper condition so that too much fuel is supplied to the corresponding cylinder.
- 1
智慧职教: The lubrication system provides the proper fuel and air mixture for the cylinder.
- 2
As the plunger moves up， the ports are closed and the fuel （） and delivered to the injector nozzle at very high pressure.
- 3
Which of the following operation will have a direct impact on the rate of wear in a cylinder liner （） A: amount of scavenge air to the cylinder B: quality of fuel injected C: viscosity of the lube oil D: compression ratio of the pisto
- 4
（） at the end of the distribution pipe ensures that adequate pressure is maintained by the pump.