举一反三
- When a shaft having a circular cross section is subjected to a torque, the cross section remains plane while radial lines rotate. This causes a ( ) within the material that varies ( ) along any ( ) line. A: shear strain; linearly; radial B: normal strain; linearly; radial C: shear strain; nonlinearly; radial D: shear strain; nonlinearly; longitudinal
- For axial compression members, because the normal stress on the cross section is evenly distributed, it is not necessary to consider the reasonable shape of the cross section
- 中国大学MOOC: A beam with rectangular cross section is subjected to pure bending. The normal stress distribution on the cross section should be
- For a bar under axial tension, the sections with the maximum normal stress and maximum shear stress are A: the cross section and inclined section with inclined angle 45°, respectively. B: both the cross sections. C: the inclined section with inclined angle 45°and cross section, respectively. D: both the inclined sections with inclined angle 45°.
- The torque on the cross section I-I is( )N●m。
内容
- 0
The surgical incision currently used for cesarean section isThe surgical incision currently used for cesarean section is<br/>generally a longitudinal incision.(<br/>)
- 1
声束有效截面 effective cross—section of beam
- 2
If the normal stress on the cross section of the axial tensile rod is σ, then the normal stress and shear stress on the 45° degrees section are .
- 3
In the following cases, ( ) belongs to pure bending. A: The external loads act on the longitudinal symmetric plane of the member; B: The members are only bent without torsion and tension deformation; C: The load on the member is only concentrated couples; D: There is no shear force on each cross section of the member, and the bending moment is a constant.
- 4
The section which is cross to optical axis of anisotropic mineral has no pleochroism and absorption.