工具必须不能触碰导线。
A: The tool must not touch the cable.
B: The tool must not bottom on the cable.
C: The tool must not butt against the cable.
D: The tool must not contact the cable.
A: The tool must not touch the cable.
B: The tool must not bottom on the cable.
C: The tool must not butt against the cable.
D: The tool must not contact the cable.
举一反三
- 在调节钢索前移开板子。 A: Remove the plate before you adjust the cable. B: The removal of the plate is required to precede the adjustment of the cable. C: Remove the plate prematurely, then adjust the cable. D: Adjustment of the cable requires previous removal of the plate.
- 不要试图使导线弯曲部分变直。 A: Do not try to make the bends in the cable straight. B: Do not attempt to straighten bends in the cable.
- To set the workpiece coordinate system with G54, the tool setting point must be used as the starting point of tool movement relative to the workpiece.
- We must ensure a CNC machine tool is used by two operators.
- Tool compensation program segment must have G02 or G03 functions to be effective.